Heusinkveld Sim Pedals Sprint

As low as €129.00 €104.03
In stock
SKU
HE-SPS

Heusinkveld Sim Pedals Sprint are a perfect choice for both casual simracers as well as professional eSports drivers.

Every tenth of a second counts! If you’re looking for pedals that help you to be both quick and consistent, look no further. Years of experience and all new testing methods have been used during the development of this innovative top-of-the line simulator product: the Heusinkveld Sim Pedals Sprint.

The Sim Pedals Sprint are a strong, compact and highly adjustable design with the main parts made out of CNC precision laser cut steel, intended for your home-use simulator. Mathematical models were made to accurately calculate pedal travel and force curves, predicting with great accuracy how each pedal behaves in different configurations.

Components

Throttle

Smooth, accurate and greatly adjustable, the throttle pedal gives you excellent control over any race car. With five pedal travel settings, adjustable pedal force curve, spring preload, pedal angle and pedal height you’ll be able to set up the throttle exactly to your liking.

Brake

The dual stage brake system consists of an adjustable initial coil spring, simulating the pad to disc gap, and progressive rubber springs. The pedal firmness is adjusted by selecting from 6 different rubber stack heights. The pedal angle and pedal height can also be adjusted.

A 120kg load cell measures up to 65kg (143lbs) of maximum actual brake force, ensuring this brake pedal caters both for simracers who like to apply significant force while braking but also for racers who like much lower operating forces.

Clutch

The clutch features a regressive spring mechanism to simulate a typical concave clutch curve. Furthermore, the clutch features three pedal force curve settings, adjustable spring preload, pedal angle and pedal height.

Electronics

The all new electronics have been integrated in the brake pedal. This allows for a clean setup with a minimum of wire clutter.

The controller board has received a conformal coating in order to shield it from moisture and dust. The product as a whole has been tested to be compliant with all applicable European EMC norms and regulations.

Smart control

The Sim Pedals Sprint come with a powerful configuration tool allowing you to set up your pedals in ways not previously possible: SmartControl. Working together with all-new electronics, SmartControl allows for instant mapping of (non-linear) pedal output curves, pedal deadzones and brake pedal force.

These adjustments can be made without having to recalibrate the pedals (including iRacing). All settings can be saved into profiles, which can be loaded again in a few mouse clicks.

Mapping pedal output curves

A key feature of SmartControl is the ability to set custom signal output maps per pedal. Traditionally race simulator pedal output has had a one-on-one sensitivity in relation to the pedal input. SmartControl allows you to map non-linear output curves using 5 zones (six input parameters).

Each pedal has a Curve Type pull-down menu with pre-defined output curves. You can also select the option to make a custom curve and manually set the desired pedal output percentage for each zone. You have complete freedom to set your own shapes.

Deadzones and brake force adjustment

SmartControl offers quick and easy adjustment of pedal deadzones. The effect of changing these adjustments can be seen visually and realtime. Also the required brake force to get 100% brake output in your simulator can be set in a few mouse clicks.

Profiles

There is support for an unlimited amount of profiles within SmartControl. Saving and loading a profile is done in a few mouse clicks. Because profile data is saved relative to your calibration values, it is possible to exchange pedal profiles between Sim Pedals Sprint owners.

Calibration wizard

Your Sim Pedals Sprint are pre-calibrated during assembly and can be used as a plug&play device. All adjustments in SmartControl can be made without having to recalibrate the pedals.

In case you do need to recalibrate (for example after making certain mechanical adjustments to the pedals), SmartControl has an easy to follow calibration wizard.

General

  • Powder coated and glass bead blasted stainless steel finish
  • USB Controller integrated in the brake pedal
  • Compatible with optional baseplate

Throttle

  • Adjustable pedal arm height
  • Adjustable pedal travel
  • Adjustable pedal force range between 4,3-14,5kg
  • Linear force curve characteristics
  • Adjustable preload
  • Load cell sensor

Brake

  • Adjustable pedal arm height
  • Adjustable pedal travel
  • Maximum detectable brake force 65kg
  • Initial low resistance force curve characteristics followed by rising resistance
  • Load cell sensor

Clutch

  • Adjustable pedal arm height
  • Adjustable pedal force range between 5-12kg
  • Adjustable concave curve (3 settings). End of travel force is appr. 67% of peak force.
  • Adjustable preload
  • Load cell sensor

Software

  • Heusinkveld SmartControl
  • Custom pedal output curves
  • Save and load profiles
  • Easy calibration wizard
  • Change pedal settings without recalibrating

Heusinkveld Sim Pedals Sprint Baseplate